IPGARD SA-DPN-2D User Manual Download

Page: 6 / 15

SA-DPN-4S-P

DP IN

AUDIO OUT

DP OUT

USB IN

USB OUT

CAC IN

CAC OUT

AUDIO IN

CONSOLE

12VDC2.0A

AUDIO

K/M

AUDIO

K/M

CAC

IN-1

IN-2

IN-3

IN-4

DP IN1

DP IN2

DP IN3

DP IN4

DP OUT

Figure 6-1: SA-DPN-4S-P

INSTALLATION

Single-Head Units:

1. Ensure that power is turned off or disconnected from the unit and the computers.

2. Use a DisplayPort cable to connect the DisplayPort output port from each computer to the

corresponding DisplayPort IN ports of the unit.

3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective

USB ports of the unit.

4. Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of the

computers to the AUDIO IN ports of the unit.

5. Connect a monitor to the DisplayPort OUT console port of the unit using a DisplayPort cable.

6. Connect a USB keyboard and mouse to the two USB console ports.

7. Optionally connect stereo speakers to the AUDIO OUT port of the unit.

8. Optionally connect CAC (COMMON ACCESS CARD, SMART CARD READER) to the CAC port in

the user console interface. For –P models.

9. Finally, power on the KVM by connecting a 12VDC power supply to the power connector, and

then turn on all the computers.

Note:

The computer connected to port 1 will always be selected by default after power up.

Note:

You can connect up to 2 computers to the 2 port KVM, up to 4 computers to the 4 port KVM and

8 computers to the 8 port KVM.

IMPORTANT WARNINGS - For security reasons:

• This product does not support wireless devices. Do not attempt to use a wireless keyboard or a

wireless mouse with this product.

• This product does not support keyboards with integrated USB hubs or USB ports. Only use

standard (HID) USB keyboards with this device.

• This product does not support microphone audio input or line input. Do not connect any

microphones or headsets with microphones to this device.

• Connection of authentication devices (CAC) with external power sources is prohibited.

Advanced 2/4/8-Port DisplayPort Secure KVM Switch

Summary of Contents for SA-DPN-2D
















Search results

Summary of Contents for SA-DPN-2D

Reviews:

Related manuals for SA-DPN-2D

Brands by name

Popular brands

IPGARD SA-DPN-2D, User Manual

Search results

Summary of Contents for SA-DPN-2D

Reviews:

Related manuals for SA-DPN-2D

Brands by name

Popular brands