background image

 

Advanced 2/4-Port DisplayPort Secure KVM Switch 

 

 

 

 

 14 

LIMITED WARRANTY STATEMENT 

 

A. 

Extent of limited warranty  

 
IPGARD, Inc. warrants to the end-user customers that the IPGARD product specified above will be free from 
defects in materials and workmanship for the duration of 1 year, which duration begins on the date of pur-
chase by the customer. Customer is responsible for maintaining proof of date of purchase. 
 
IPGARD limited warranty covers only those defects which arise as a result of normal use of the product, and 
do not apply to any: 
 

a. Improper or inadequate maintenance or modifications 

 

b. Operations outside product specifications 

 

c. Mechanical abuse and exposure to severe conditions 

 
If  IPGARD receives, during applicable warranty period, a notice of defect, IPGARD will at its discretion re-
place or repair defective product. If IPGARD is unable to replace or repair defective product covered by the 
IPGARD warranty within reasonable period of time, IPGARD shall refund the cost of the product. 
 
IPGARD shall have no obligation to repair, replace or refund unit until customer returns defective product to 
IPGARD. 
 
Any replacement product could be new or like new, provided that it has functionality at least equal to that of 
the product being replaced. 
 
IPGARD limited warranty is valid in any country where the covered product is distributed by IPGARD. 
 

B.  

Limitations of warranty  

To the extant allowed by local law, neither IPGARD nor its third party suppliers make any other warranty or 
condition of any kind whether expressed or implied with respect to the IPGARD product, and specifically dis-
claim implied warranties or conditions of merchantability, satisfactory quality, and fitness for a particular 
purpose. 
 

C.  

Limitations of liability  

To the extent allowed by local law the remedies provided in this warranty statement are the customers sole 
and exclusive remedies. 
 
To the extant allowed by local law, except for the obligations specifically set forth in this warranty statement, 
in no event will IPGARD or its third party suppliers be liable for direct, indirect, special, incidental, or conse-
quential damages whether based on contract, tort or any other legal theory and whether advised of the pos-
sibility of such damages. 
 

D.  

Local law 

 

To the extent that this warranty statement is inconsistent with local law, this warranty statement shall be 
considered modified to be consistent with such law. 

Summary of Contents for SDPN-2D
















Reviews: