IPico™ WN400 Integrated Access Device
User Guide
User Guide © 2001 Lucid Voice
27
2. My new settings are not permanently saved
• You probably did not click the
Save
button before logging out.
• There might have been an error. Make sure you see the ‘All OK’
message.
• Try rebooting.
3. I encountered a system error. What do I do?
• You probably entered incorrect IP address settings. Verify that
IP
ico
’s LAN IP address is different from the WAN IP address.
IP
ico
’s default gateway IP address must be on either the LAN
subnet or the WAN subnet.
4. Changes do not take effect
• After saving your new settings and logging out, you did not log
back in using
reload
as password login.
• Try rebooting.
N e t w o r k P r o b l e m s
1. I cannot access my IP
ico
device from the network.
• Verify that IP
ico
’s IP address is on the same network as your PC
client. Please refer to the section titled
IP Address Configuration
.
• Verify that the subnet mask is the same as your PC client. Please
refer to the section titled
IP Address Configuration
.
• Verify that the IP
ico
interface is connected to your PC.
• Try replacing the Ethernet cables.
• Try restarting with new network settings.
