2
1CH Mini DVR Full Manual V.1.0
GENERAL SAFETY AND PRECAUTIONS
This Mini DVR is manufactured to meet international safety standards. Review the following safety
precautions to avoid injury and prevent damage to the DVR or any products connected to it.
1.
Use a correct power source. Do not connect this product to a power source that supplies more than
the specified voltage (DC12V), as this will cause damage to the unit.
2.
Never insert anything metallic into the DVR as this can cause electric shock.
3.
Do not operate in wet & dusty conditions. Keep product surfaces clean and dry. Avoid placing the
DVR in areas like a damp basement or a dusty hallway.
4.
Do not expose this product to rain or use near water. If the product gets wet, unplug it and contact an
authorized dealer immediately.
5.
To clean the outside case of the DVR, use a lightly dampened cloth (no solvents).
6.
Do not operate if you suspected to unit is faulty. If there are any unusual sounds or smells coming
from the DVR, immediately unplug it and contact an authorized dealer or service centre.
7.
Do not attempt to remove the top cover.
Warning: Removing the DVR’s cover can cause an electrical shock.
8.
Handle DVR carefully to avoid damaging the product. Dropping your DVR on any hard surface may
cause the unit to malfunction. If the DVR doesn’t work properly due to physical damage, contact an
authorized dealer for repair or exchange.
9.
The unit has a lithium battery preinstalled.
10.
The standard lithium cell 3V battery located on the motherboard should be replaced if the time clock
does not hold its time after the power is turned off.
