CM-IW100T
Instruction Manual
7
13. Place the retention bracket over the iPod
touch. Make sure the bent tab on the
retention bracket is in contact with the
bottom edge of the iPod touch. There
should now be a very snug fit around the
entire iPod touch
14.
Attach the faceplate to the utility box as
shown in Figure 8.
15
.
Plug the included DC power supply into
the Power connector on the wall plate
and into a wall outlet, as shown in Figure
3.
Note: To sync your iPod touch with your
computer, please follow the steps above
in reverse order to remove the iPod touch
and sync. once your synchronization is
complete, reinstall the iPod touch and fol-
low the steps to reassemble.
Note: If landscape orientation is prefered,
the iPort logo button can be reoriented
accordingly, see operation.
Figure 6: Connector Board
