CM-IW200
Instruction Manual
2
Introduction
The iPort
®
Control Mount is an in-wall system that
allows an iPod touch
®
(4th generation only as of
publication date. Please visit www.iportmusic.com
for updated/additional iPod product releases) to
become a semi-permanent fixture in your home
control system through wireless applications.
Before installing and using the CM-IW200, please
read and follow all of the instructions in this manual
carefully.
System Capabilities
:
• Delivers local-zone unbalanced audio up to 30
feet (9m) from the mount.
• Charges the iPod touch while it is mounted.
• Features variable audio volume control via the
installed iPod touch in portrait orientation.
• Fixed audio volume control via connected audio system such as a receiver.
• Provides additional long distance power only up to 200’ using 18 awg wire. See chart
below for additional wire specs. Note: Audio distance is still limited to 30 feet from
the mount and wall plate. For additional power-only distance, use the 2 pin connec
-
tor located on the back of the audio wall plate. (See Figure 3)
iPort Control Mount Box Contents:
(1) iPort in-wall mounting system (faceplate and mounting cradle)
(1) Audio wall plate
(1) Regulated power supply
(1) Installation cut-out template
(1) Instruction manual
Required Tools
The following tools are required to install the iPort:
• #2 Phillips screwdriver
• Wire cutters and wire strippers
• RJ-45 cable crimp tool and modular connectors
• Sheet rock saw (for retrofitting into an existing wall)
Wire Gauge
Distance (Feet)
22awg
75
20awg
120
18awg
200
