23
iPor t ver. FS
Ins tr uction Manual
Audio
No audio is produced although
the iPod shows it is playing.
1) Insure that the audio output connections from the
wallplate to the amplifier are securely connected.
2) Insure that the iPod is fully seated into the iPort.
3) Insure that the Cat5/RJ-45 cables used between the iPort
and wallplates are wired identically (”straight-through”)
4) Insure all connections to/from the included Connection
Box are securely made.
RS-232
Can not control the iPod in
2-way mode.
1) Insure that the RJ-11 to DB-9 cable is securely connected
to both the wallplate and to the control system being used.
2) When the iPod is in 2-way mode, the iPod’s front-panel
controls will not operate (the iPod interface is disabled).
iPod does not respond to IR
commands when in 2-way
mode.
1) When two-way mode is active, the iPod will only respond
to the following IR control codes: Play/Pause, Next Track,
Previous Track, Stop.
Video
No photos are displayed onto
the video monitor although
the iPod shows it is playing a
slideshow.
1) Insure that the video output connection from the
wallplate to the video monitor is secure.
2) Insure that the iPod is fully seated into the iPort.
3) Insure that the Cat5/RJ-45 used between the iPort and
wallplates are wired identically (”straight-through”)
4) Insure that the TV ON option is selected on the iPod so
that the video is being output.
Multi-Function
Buttons
Multi-Function buttons do
not control volume (FS-2
through FS-5 models).
1) Check
Fixed/Variable volume switch position. Refer to
Figure 2 on Page 6.
Multi-Function buttons do
not skip tracks (FS-2 through
FS-5 models).
1) Check
Fixed/Variable volume switch position. Refer to
Figure 2 on Page 6.
Section
Problem
Solution
