iPOWER TPD-800A Quick Installation Guide
1. Connect the PC and the device directly;
2. Revise the PC network configuration to access TPD-800A firstly; making sure the changed PC IP address
and the default device IP address are in the same network segment. For instance: set the PC IP address to be
192.168.1.X (X can be 0 to 255 except 163); the Sub-net Mask 255.255.255.0; the default gateway
192.168.1.1; As shown in the following :
3. Log on to the user administration interface through IP 192.168.1.163 with the default login name and
password: