iPOWER TPD-800A User Manual
5
8/9. Display TPD-800A address and other parameters
10. RUN
:
operation indicator
11. M/S
:
Master/slave indicator
12. OUTLET No. 1
:
select outlet and other parameters (T/H)
13. Water: connect water sensor
14. Smoke: connect smoke sensor
15/16. T/H1, T/H2: connect temperature/humidity sensor
17. Fuse
18. Power indicator
19. Socket lock
20. Outlet sockets
Ⅴ
. Mounting Method
Horizontal installation.
Ⅵ
. H ardware I ntroduction
1. Power on & Self-check
The buzzer makes a sound when TPD-800A is connected with AC power source, LED screen lightening and
sequentially display
8.8.8. 8.8.8.
(it means digitron is normal, any different display means fault), software
version number (for example
U0.0 1.01
), baud rate (for example
9 600
), TPD-800A default address (For
example
ABC DEF
), TPD-800A series (for example
310 1-d
), socket quantity(for example
OU7 08
), finally
display the value of which OUTLET No.1 pointing to (for example
A1 0.0
), and RUN indicator flashes. M/S
indicator on means this TPD-800A is master while off means slave TPD-800A.
2. Current, voltage, temperature & humidity Monitoring
OUTLET No.1 and OUTLET No.2 are together used to monitor the relative outlet value (OUTLET No.2 has the
function of plus 8 port or minus 8 port).
3. Water logging & Smoke Monitoring
3.1 When the water logging sensor monitoring the water, TPD-800A LED screen displays and the buzzer
alarms at the same time.
3.2 When the smoke sensor monitoring the smoke, TPD-800A LED screen displays
,
and the buzzer
alarms at the same time.
4. Outlet Fault Monitoring
When one outlet breaks down (For example: A1), the TPD-800A LED screen will display relative fault (for