37/83
RTSP setting
If you have a media player that supports RTSP protocol, you can
use it to receive the video streaming from the IP camera. The RTSP
address can be set for two streamings respectively.
1. RTSP Server: enable or disable
When the state is "Disable" everyone who knows your camera IP
Address can link to your camera via RTSP. No username and
password are required.
Under "Basic" and "Digest" authentication mode, the camera asks
the user to key-in a username and password before allowing
access.
The password is transmitted as a clear text under basic mode,
which provides a lower level of security than under
“digest” mode.
Make sure your media player supports the authentication schemes.
2. RTSP Port: set up port for RTSP transmitting (Default: 554)
3. RTP Start and End Port: in RTSP mode, you can use TCP and
UDP for connecting. The TCP connection uses the RTSP Port
(554). The UDP connection uses the RTP Start and End Port.
Summary of Contents for iDC-1DCF
Page 1: ...1 83 User Manual IP VANDAL DOME CAMERA iDC 1DCF ...
Page 53: ...53 83 ...
