49
www.acti.com
www.iprosecu.com
You can deny an IP address or a range of IP address so that they cannot access
the IP camera. Tick the "enable" box, key-in the IP address you want to deny,
select “deny" then click “Add" to add it to the list.
You can also choose to deny a range of IP address but allow one or several IP
address of them.
Take the picture above
for example, IP
address
192.168.50.151~161 are not allowed to connect to the camera, but only
192.168.50.159 can access. Note: In the list "allow" condition must be ranked
before "deny" condition.
For
example,
if
we
exchange
the
sequence,
set
"Deny:
192.168.50.151~192.168.50.161" for the first item and "Allow:
192.168.50.159" for the second item in the list, the IP "192.168.50.159" turns out
to be denied by the camera because the "deny" condition has the priority
according to our ranking way.
As for those IP addresses not included in the list, the default is “allow”.
d. QoS/DSCP(Quality of Server/Differentiated Services Code-point)
DSCP specifies a simple mechanism for classifying and managing network traffic
and provide QoS on IP networks. DSCP is a 6-bit in the IP header for packet
classification purpose.
