Examples of legal transmitters are: DECT telephones or their base
stations, Wi-Fi routers, Wi-Fi devices, working mobile phones
(GSM, 3G, 4G, etc.), wireless video cameras, child surveillance
systems, etc. Illegal devices, i.e. bugs can be: hidden video
cameras, hidden GSM/3G/Wi-FI transmitters, VHF/UHF trans-
mitters, microwave transmitters, etc. The task of an RF detector is
to show the operator all the RF sources that are present. The
operator is then able to study all the sources and as such find
any illegal transmitters if they exist.
Parts description
Designed for simplicity, the iProtect 1205 contains powerful
highly-sensitive elements in its circuitry, allowing the operator
to conduct countersurveillance sweeping at a highly professional
level. The advantage of RF detectors is their wide frequency
coverage and their ability to show radio waves right near
The iProtect 1205 has a 16-segment bargraph indicator which
allows the operator to see the slightest changes in level and as
such accurately find the area with the strongest signal for
location.
When it is necessary to decrease the sensitivity, typically during
the location process, the operator can use the attenuator function
ATT. The iProtect 1205 has a 'physical' (as in professional
communications) RF attenuator of a level up to -20dB. The
corresponding indicator will show the attenuator status.
The working mode (Vibrating/Audio/Normal) can be selected by
the MODE button. The vibrating mode allows the user to 'feel'
the increased level without actually watching the bargraph. This is
convenient during the process of inspecting hard to access
places like gaps under/behind furniture and construction. The
Audio mode helps the user to identify signals in many cases.
The power can be turned on and off with the help of the button
on the bottom tip of the detector. The battery compartment is also
situated there.
When the battery becomes low, the power indicator changes its
color from green to orange. When the battery is about to dis-
charge completely, the power indicator becomes red.
The device is powered by 1 LR06 (AA) battery. The resource
time is 10-20 hours.
The iProtect 1205 solves this task in the best possible way,
accurately eliminating any background noises and indicating real
signals. With the help of the 1205 the operator can track all RF
sources and is therefore able to find the bugging device if there
is one present.
the source and therefore show the location of the transmitter.
High-sensitive RF antenna
Attenuator function
16-segment bargraph
Vibrating and audio modes
172
mm
19
mm
Power on/off
4
5
