background image

Inspecting vehicles

There  are  a number of bugs and trackers which can be installed 
in a car. Firstly, make sweeping inside the vehicle similar to the 
procedure for inside a premises. Then repeat the procedure pro-
bing the car from outside, above and under it. Keep the engine 
running.
GPS  trackers  (and  also  3G/4G  trackers)  accumulate  the  route 
and send the data periodically,  with a  pre-programmed interval, 
more frequently when the car is moving. Therefore it is necessary 
to  detect the  transmissions while the  car  is  moving and  during 
quite a long period of time. Because of these reasons the detec-
ting  device  must  be  very  sensitive  to  detecting  the  RF  waves 
from a car's interior during travel while the transmitter is situated 
somewhere outside the car. That is why we recommend applying 
the more sensitive Protect 1207i, which is better suited for finding 
GPS trackers. 

4G (LTE) telephone

VHF/UHF transmitter 5mW
AC powered audio transmitter

Baby watch 2.4 GHz
Wireless camera (hidden) 50 mW
GSM transmitter (Baby monitor) / 
GSM telephone
Bluetooth
Wi-Fi router
Wi-Fi transmitter
3G transmitter / telephone

50-100 cm

50-100 cm
50 cm
50 cm – 1 meter

30-200 cm
10-30 cm
50-100 cm
30-100 cm

20-60 cm
20-60 cm

Detecting distance

detected at a distance of approximately 10 cm. Another way is to 
place the iProtect 1205's antenna under the table close to the 
place where the person will sit (in this case it will be necessary 
to make an RF extension cable for antenna). Watch the RF level 
on  the  bargraph  when  the  target  person  sits  or  during  the 
meeting. An increased level may be a sign of a transmitting bug. 
(If a mobile phone is ringing or somebody is talking by mobile 
phone it is normal for the device to show an increased level.)

8

Summary of Contents for 1205






Reviews: