RACK TOWER ONLINE UPS
4.011.2017
RTS-ON-user-manual_ENG-R1
19
ST
DB
Y
2 5 %
5 0 %
7 5 %
1 0 0 %
2 5 %
5 0 %
7 5 %
1 0 0 %
4.6.7 ID setting
①
Enter the setting interface. Press and hold the function setting key
for more than 2 seconds, then come to
setting interface, press and hold the inquiring key (
,
)
for more than half a second(less than 2 seconds),
select the function setting, choose output voltage setting interface, at the moment, the letters “Id” will flash.
②
Enter the output voltage setting interface. Press and hold the function setting key
for more than half a
second(l
ess than 2 seconds), then come to setting interface of ID, at this time, the letters “Id” will not flash any
more. The numerical value next to the “Id” will flash. Press and hold the inquiring key (
,
)
for more than
half a second (less than 2 seconds), select the numerical value. The provided ID numbers are 1, 2, 3, 4, 5, 6, 7,
8, you can choose anyone by yourself (The default value is 1).
③
Confirm the output voltage setting interface. After selecting numerical value, press and hold the function setting
for more than half a second (less than 2 seconds). Now, the ID setting function is completed and the
numerical value will light without flash.
④
Exit from the setting interface. Press and hold function setting key
for more than half a second (less than 2
seconds), exit from the setting interface and return to main interface.
Note: ID only can be set before doing parallel operation.
ST
DB
Y
2 5 %
5 0 %
7 5 %
1 0 0 %
2 5 %
5 0 %
7 5 %
1 0 0 %
