The manufacturer warranty will be voided if the following procedures are not followed. You
must register your sprayer by using one of the methods below. During use, always use one
of the provided filters to prevent debris from clogging the pump. After every use, rinse out
the sprayer and tips by spraying 1 gallon of water (approximately 2 minutes) through the
pump to rinse any residual products from the unit to prevent corrosion or clogs, then remove
the battery. If used for applying sealers, deck stains and other coating products, always rinse
the gun using a Sodium Hydroxide based deck stain stripping product.
DO NOT USE
MINERAL SPIRITS OR PAINT THINNERS.
Chemical Compatibility:
This product can
NOT
be used with Sodium Hypochlorite over 10% in strength, or chemicals
that contain solvents, non-water based diluents, Acetone, Xylene, Acids, paint removers or
similar products.
IPS Pro WARRANTY REGISTRATION
To register your IPSPRO gun for Warranty,
fill out the form below and mail it with a
copy of your Receipt to: IPSPRO 1145 Via Jardin, West Palm Beach, FL 33418
Or register online on: www.ipspro.us
