SAFETY WARNING
Stay alert and vigilant, be focused on the work you are doing and be cautious of your
surroundings while using this device. Do not use when you are ti
red or under the influence of
alcohol, drugs, or medications. Use safety gloves, protective masks, and protective glasses.
Battery Safety
: Only use the batteries and charger provided with the tool. When batteries
are not being used, keep them away from any metal objects like paper clips, coins, keys,
nails, or screws. Keep the battery charger, batteries and gun motor dry at all times to avoid
damage or electrical shock. When damaged, liquid can leak from the battery, avoid contact
with the substance. In the case of an accidental contact, clean with water.
If the fluid gets into
your eyes immediately rinse with water and seek medical assistance.
Using The IPSPRO Spraying System:
Step 1: Unpack the sprayer and make sure the kit is complete.
Step 2: Charge the battery by following the directions on the battery chargers label. Always
fully charge the battery 1.2 AH
before the first use. The initial charge of the battery 1.2 AH
can take longer than 4 hours.
Step 3: Insert the battery into the bottom of the sprayer by gently sliding it in until you hear a
«click». To remove the battery, press and hold the button on the battery and gently pull the
battery o
ff
.
Step 4: Insert the hose on the bott
om of the sprayer. Next, insert the filter on the opposite
end of the hose and pl
ace filter into your container. To use the sprayer with a bottle. Use the
small hose and attach bottle to the bottom of gun.
NOTE:
ALWAYS USE A FILTER
, and when working at heights, start the device on ground
level to prime the pump.
IPSPRO accessories available on www.ipspro.us
