Product Description of BRT-408
Page 2 of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
. sales@a-brt.com.
© 2015 All rights reserved. Subject to change without notices.
Fig. 1
Front View
Fig. 2
Back View
As shown in Fig. 1, BRT-408 timer switch has an LCD display and an On/Off buttons on the front.
The LCD display shows the current time and the current status of the switch. The On/Off button is
used for turning on or turning off a load. BRT-408 timer switch also has wiring terminal blocks on
its back.
When the On/Off button is pressed,
The display shows On and the load will be turned on immediately; and
When the On/Off button is pressed again,
If there is no timing period being set, the load will be turned off immediately and the display
will show Off, and;
If there is timing period being set, the load will be turned on automatically during the preset
timing period. Press the On/Off button will cancel the timing operation and turn off the load
immediately.
Fig. 3
Hidden 9 Keypad Panel
As shown in Fig. 3, the front plate can be flipped down from the top edge. A 9 keypad panel
hidden behind the front plate is used for setting up the timer. Please refer to
“
BRT-408 Timer
Switch Setup” for details.
Specification Parameters:
Input Voltage
220
～
240V(50Hz/60Hz)
Operation
Environment
No-condensation 20-90% RH
，
-20
℃～
55
℃
Wattage
2000W
Load type
All Types*
Mounting Hole
Spacing
60mm
Matching
Box
75mm x 75mm x 50mm
Wall Mount
Unit Dimension
86mm x 86mm x 43mm
Wall mount
Unit Weight
116g
