P1D Wireless Broadband Modem User Manual
- Page 29 of 47 -
Q.
H
OW DO
I
INSTALL MY
M
ODEM ON A DIFFERENT COMPUTER
?
A.
If you have already installed your modem on ONE PC and wish to use it on a SECOND PC
or laptop, insert the Installation CD into the second PC and run the installation software. You
will automatically connect to the registration web pages. Select ‘Support Services’. You may
modify your settings here, if needed. If you leave all fields unchanged and click ‘Apply’, the
username/password cookie will access your second PC and the dialer will automatically
configure the modem.
Q.
W
HEN SHOULD
I
DE
-
INSTALL THE MODEM AND
/
OR
PC
S
OFTWARE
?
A.
You should de-install the Modem and PC software only when you wish to discontinue
service.
P1D Wireless Broadband Modem User Manual
- Page 30 of 47 -
Appendix D – Modem Display Warnings
The Wireless Broadband Modem top panel contains 5 individual LEDs, as shown in Figure 9,
used to indicate various activities on the modem, such as ON/OFF, current signal quality, data
traffic activity and network connection status.
However if the modem experiences certain error conditions the display will be used to signal
the condition back to the user.
Figure 9
Figure 9 shows indicators location and function.
The indicators can signal warning or error scenarios as well as their normal functions and this
section will aid the user in interpreting such a display combinations.
Power-On Self Test Failure
At power-on the Modem will carry out a number of tests to confirm the operational integrity of
various onboard components. If the Traffic activity and right-hand (nearest to On/Off switch)
signal quality indicator are lit together, this indicates a self-test failure.
In this event it is recommended that you switch off the modem and contact your Service
Provider for Technical Support.
Software Upgrade Warning
If all the Modem indicators, in normal operation, flash on and off together then the network is
informing the user that a Modem software upgrade is required.
Please refer to Appendix C for details on performing software upgrades.
On/Off switch with
indicator
Connection status
Signal quality indicators
Traffic activity
