IQCCTV
IQ960DVR User Manual
41
Alarm Type
Function
Video
Loss
Sends an alarm when the DVR can’t receive video signal (such as
camera damage, broken cables or damaged to the power supply).
Motion
Detection
When an object moves into motion detection area, the alarm will be
triggered. You can adjust sensitivity level to suit the needs of your
actual application environment.
I/O Status
System can convert an alarm signal triggered by external sensor into a
signal identified by the system.
HDD loss
When a Hard Drive is not detected (HDD damage, power supply
malfunction), or HDD auto-overwrite is off and there is not enough free
space, an alarm will be triggered.
5.3.6.3 Maintain
Click [Main menu
à
Advanced
à
Maintain] to enter into the ‘Maintain’ menu as shown below.
Ø
Auto Reboot:
Enable the auto maintain function so that the unit will perform maintenance
regularly as per the user’s needs.
Ø
System Upgrade:
To perform upgrade function, after decompressing the update file
package, copy the file named “dvrupgrade” to root directory of U flash disk. Then, Insert the
U flash disk into USB the port of the DVR and Click <Upgrade>.
Ø
Load Default:
If [Load Default] is selected, initialize the system to the factory default.
Ø
Reboot:
Click the [Reboot] button to manually restart the DVR system.
Ø
Shutdown:
Click the [Shutdown] button to shutdown the device.
