IQCCTV
IQ960DVR User Manual
44
To set a pre-set point, please see the following steps;
1.
Total:
Set up pre-set point quantity
2.
Cur Point:
Indicates the starting point cruised. System default point is 01. The model
supports up to 255 pre-set points.
3.
Stop time:
Sets the stop time at each point. Range is 1~255;
4.
GOTO:
Go to a specific preset point.
5.
Set:
Establish a set of specific preset points of a PTZ camera.
a. Select the camera you desire to set a preset point
b. Adjust the camera to the desired direction
c. Click [Set] to set the point as preset point
d. Click [Save] to save the preset point
e. Follow the above step to add one more preset point.
6.
Save:
Save all the preset points
7.
Clean
: Delete one selected preset point.
Please Note
: Up to 254 pre-sets per one camera can be stored. However, actual preset
quantity differs depending on PTZ performance.
5.7 PIP Mode
The user can display a Picture-in-Picture (PIP) in live mode. PIP has two display modes,
including 1X1 display mode and 1X2 display mode.
5.8
Record search
Enter into the [Record Search] menu from the Pop-up menu to conveniently and quickly
search/playback the recorded files. To find out how to search through recorded files, see section
5.3.3.1.
5.9 Mute
Click the [
] icon, or press <Mute> button on the front panel and Remote controller to control
the mute of DVR.
1x1 display mode
1x2 display mode
