Programming the MC4 Control Board
The following is a list of programming and available features. Please be aware that the MC4
Control Board is one of the most advanced gate operator circuit boards available and you should
take care when programming and choosing desired features. Refer to this manual if a feature that
you desire is needed or if any changes are necessary to be made in the menus.
The MC4 Control Board is divided into 8 menus. Using the YELLOW, GREEN, and BLUE
buttons, you can navigate through the menus using the BLUE and YELLOW buttons and select an
option or enter a menu by depressing the GREEN button. When changes are being made in any
menus the programming “
*
“ will be displayed at the top right corner of the LCD display. The 8
menus consist of the following:
Adjust the Clock
Adjust Time Settings
Auxiliary Settings
Maintenance Menu
Motor Drive Menu
Digi / Tach Learning
Error and Fault Log
Password Protected
To enter any of the menus from the Home Screen (the current Date and Time is displayed on the
Home Screen), simply press the GREEN button. “Adjust the Clock” will be displayed. At this
point, you have entered the menu and may navigate using BLUE and YELLOW buttons to make
the adjustments that you desire. To enter a menu, navigate until the one you desired is displayed
and push the GREEN button to enter. To exit a sub-menu, use the BLUE button all the way
through the menu until “exit the sub-menu” is displayed and then push GREEN button. To exit the
main menus, just press the YELLOW button until the Home Screen (time and date) is displayed.
Adjust the Clock
:
Adjust Date / Time
•
Year =
•
Month =
•
Date =
•
Day =
•
Hour =
•
Minute =
Exit the sub-menu
18
