background image

- 6 -

WARRANTY AND REPAIR INFORMATION

1-Year Comprehensive Warranty

iQ Pet provides the original purchaser with a 1-YEAR WARRANTY for all products in the iQ Pet 

Series. The warranty begins from the date of purchase. For the first year, coverage is for Parts, Labor, 

and Accessories. After the first year, the cost of Parts, Accessories, Labor fees, and Shipping fees 

incurred are the customer’s responsibility. Labor fees will be variable depending on the extent of the 

work required.

To Qualify for the iQ Pet Warranty

All products must be registered and/or a proof of purchase is required to initiate repair work under 

warranty. To register your iQ Pet product, log onto our website at www.iqpet.com click on the 

warranty registration link, and fill out the required information. Registration must be completed 

within 30 days of purchase. If you do not have access to a computer, you can call our toll free 

number at 1-888-811-9111, and one of our customer service representatives will register the product 

for you. If you were unable to register your product within 30 days of purchase, we will accept all 

products for repair with a proof of purchase. We strongly recommend keeping the original receipt. If 

your product is not registered and a proof of purchase is not available at the time of service, iQ Pet 

will estimate the age of the unit by the serial number. Serial number estimates can differ from the 

actual purchase date. A serial number estimate is the only method of determining an approximate 

date of purchase without product registration or a proof of purchase.

Not Covered Under Warranty

iQ Pet DOES NOT offer warranty for products that have been bought secondhand or as a resold 

product. iQ Pet DOES NOT replace defective units or provide refunds for products purchased from 

enough battery life.

-  Tighten the collar strap around your dog’s neck if it is too loose and make 

sure the contact points are held firmly against the dog’s skin.

-  If your dog has a thick or long coat, you may need to trim the hair on 

the dog’s neck, so that both contact points are touching the dog’s skin.

-  The intensity level may be too low for your dog. Increase the stimulation, 

starting from the lowest level, until the dog responds, usually by a neck 

movement, head shaking, or looking over the shoulders. The response 

may be very subtle.

3. My dog has skin irritation.

-  This may be due to an improper fit or leaving the collar in the same 

location for an extended period of time. If your dog exhibits signs of skin 

irritation, consult with a veterinarian.

-  Once the dog’s skin returns to a normal condition, continue to use the 

collar and check your dog’s neck each time you use the unit.

To purchase optional accessories, please visit www.iqpet.com or call our 

customer service at 1-888-811-9111.

Summary of Contents for no bark









Reviews: