www.
my-io
.com
2
www.
my-io
.com
3
EN
Initial Connection
.................................................... 3
Get Connected
....................................................... 4
Charge & Play
........................................................ 5
The Charger
........................................................... 6
The Adaptor
........................................................... 6
Get Disconnected
................................................... 7
Specification
.......................................................... 7
Frequently Asked Questions
.................................... 8
Warranty Information
............................................... 9
Product Registration
............................................. 10
STEP 1
Before you power on the Bluetooth receiver (i.e iO PLAY) make sure all other
Bluetooth devices are disabled.
STEP 2A (For use with iO PLAY)
Select your MP3 device mode:
(Default Mode):
»
Any iPod with 30 pin data port. Press and
hold Left & Right button on iO PLAY for 3 seconds until you
hear 1 confirmation beep.
iPhone Mode:
»
Press and hold Left & Right buttons for 3
seconds until you hear 2 confirmation beeps.
Once the MP3 device mode has been selected for the first time it will be held
in memory of the iO PLAY.
STEP 2B (For use with iO TALK1)
Select your MP3 device mode:
(Default Mode):
»
Any iPod with 30 pin data port. This is the default mode
and iO Talk1 is preset with this mode selected.
iPhone Mode:
»
For use with iPhone.
> Press “
Menu
” on the iO Talk1 console.
> Scroll to and Select “
Setup Wizard
”
> Scroll to and Select “
iPhone Mode
”
> Scroll to “
iPhone mode on
”
>
Select this mode. iO Talk1 will confirm you have
selected iPhone mode “Mode Selected”.
Once the MP3 device mode has been selected for the first time it will be held
in memory of the iO Talk1.
STEP 3
Continue to the
GET CONNECTED
section.
This section is only relevant when being used with iO Play or iO Talk. This
section is to make sure the correct “MP3 mode” is selected for the device
you intend to use with the iO Bluetooth car kit.
CONTENTS PAGE
INITIAL CONNECTION
