7.7
Scheduling Regular Measurements
To take measurements at regular intervals, choose the
interval and the sample time per interval. If you would
like to take a measurement every hour for 5 minutes,
for example, enter <1> and <hour> in the top row of
the window and <5> and <minutes> in the second
row.
Next, select the time you would like this measurement
schedule to begin, designated with <
Start time
>. If
you would like to begin immediately, select <now>. If
you would like the measurement to start at a specific
time in the future, press on the <…> button and
specify that time.
Next, select the desired <
End time
> of the measure-
ment schedule. If you select <unlimited>, the meas-
urement schedule will stay in effect until disabled. This
can be done by deselecting the <Timer Enabled> but-
ton. Alternatively, the Auto Timer may be disabled
directly in the ParticleScan Menu starting with [auto].
You can also select a specific end time by clicking on
the button to the right of <unlimited> and clicking on
the <…> button.
The third option to define the end time is to select a
specified number of run times.
Once you made your selections, you can download
these to the ParticleScan with the <Save> button. To
enable the timer, you must select <Timer Enabled>.
Alternatively you can enable the Auto Timer in the
Auto Timer menu which is accessible from the
ParticleScan.
22
Chapter 7 – Computer Connectivity
Summary of Contents for ParticleScan CR
Page 30: ...30 Notes...
Page 31: ...080312_IQ_MA_PSPPSCR_US...
