1
2
1. Appearance
2. Installation
2.1 Install two fixed bracket B to the wall and ensure that both are on the same horizontal. The distance
between two fixed bracket B is L1 (L1= length of IQAio-129mm). The distance from the bottom of fixed
bracket B to the ground is H1 (H1= length of IQAio-71mm+800mm). The distance from the bottom of
IQAio to the ground is 800mm.
2.2 After confirming the position of fixed bracket B, use
Φ8mm
electric drill to make four 80mm deep
holes on the wall.
2.3 Insert the expansion rubber into the holes and then fix the fixed bracket B to the wall with self-tapping
screws.
2.4 Hang IQAio directly on fixed
bracket B and then adjust projection
position.
2.5 After confirming the projection
position, according to position of the
bottom mounting bracket C to mark in
the long waist hole of fixed bracket C
on the wall.
2.6 Remove IQAio and unscrew the
screws of fixed bracket C.
Take off the fixed bracket C and save
the removed four pieces M4 * 12
round head screws with gasket.
2.7 Use
Φ8mm
electric drill to
make four 80mm deep fixing
holes on wall which marked
before.
2.8 Insert the expansion
rubbers into the holes that
have been punched, and then
fix fixed brackets C with the
self-tapping screws in
accessory box.
IQAio GR519
— Quick Guide—
