GW-USB-13A
© 2014 MICRORISC s.r.o.
www.iqrf.org
User_Guide_GW-USB-13A_140331
Page 2
Description
GW-USB-13A is an IQRF gateway with USB connectivity
and OLED display.
It is a part of the IQRF platform intended as an interface
between USB and an IQRF network or a portable interface
between a human and an IQRF network.
It allows to visualise and setup parameters in given
application. GW-USB-13A is a generic equipment, i.e. the
hardware is fixed and the user can implement specific
functionality by software only.
Applications should be developed using the DS-PAGER
development set.
Applications
• Home automation
• Portable controllers and pagers
• Diagnostic tool
• Portable service tool for IQRF network management
Key features
• OLED display 1“, 128 x 64 pixels, white
• 8b microcontroller
• USB v2.0 interface
• EEPROM memory
• 3 pushbuttons
• Piezo buzzer
• IQRF transceiver module
• On-board PCB antenna
• Backup accumulator
• Very low power consumption in Sleep mode
Block schematics
