GW-WIFI-01
User_Guide_GW -WIFI-01_180511
Page 20
Log
Transmitted data stored on the Cloud server stays also accessible directly in the GW buffer.
Buttons:
Restart
To restart the GW
Erase Log
To erase the content of the whole GW internal log memory
Update
To read the data from the GW and refresh the Log window
Close
To close the GW Tool window
Three types of logs are stored in the gateway:
IQRF Rx
Data received from IQRF network and transmitted to the Cloud server
IQRF Tx
Data downloaded from Cloud server and transmitted to IQRF network
System
Certain events that occurs during the execution. The user do not usually need to take care about it.
Nevertheless it can be helpful in case of nonstandard behavior.
Last Record
When selected, the output list is scrolled down to display the last acquired data.
The format of IQRF RX/TX data depends on the user application in TR (e.g. DPA or any user-specific protocol). The format
of system log is fixed.
The following system events are logged:
GW_OFF_BY_BTN
CLOUD_LICENSE_DONE
GW_OFF_BY_LOW_ACCU
CLOUD_CONNECTION_ERROR
GW_ON_BY_BUTTON
CLOUD_REGISTRATION_ERROR
GW_ON_BY_EXT_POWER_ON
CLOUD_UPLOAD_ERROR
GW_RESET
CLOUD_DOWNLOAD_ERROR
GW_RESET_FOR_NEW_SETTINGS
CLOUD_DOWNLOAD_CONF_ERROR
GW_RESET_FOR_FIRMWARE_UPGRADE
CLOUD_SYSTEM_PACKET_ERROR
GW_LAN_ERROR
CLOUD_UNKNOWN_PACKET_RECEIVED
SD_CARD_ERROR
CLOUD_LICENSE_ERROR
CLOUD_REGISTRATION_DONE
TR_SPI_ERROR