2009 NETCONS, s.r.o.
Page 7 of 16
4.2 Managing output power socket by phone call
Output power socket can be managed also by call using by mobile phone or
fixed phone. In such a case – power socket runs some action immediately.
Action can be output power interruption (appliance reboot), negating output
power socket status or other action. Action must configured in advance.
Message
Description
Response
Type
RING=SWITCH
If this parameter is configured,
status of output power socket is
changed (negated) by phone call.
RING=SWITCH – OK
Conf
RING=RESTART
If this parameter is configured,
output power socket is turned on
for time configured by RESETTIME
parameter.
RING=RESTART – OK
Conf
RING=NOACTION
No action is performed on phone
call
RING=NOACTION – OK Conf
RING?
Information message: Request for
ring action configuration
RING=(NOACTION),RE
START,SWITCH
Conf
RESTARTTIME=XX
Configures time in seconds for
RESTART action. Maximal number
is 180.
RESTARTTIME=XX –
OK
Conf
RESTARTTIME?
Information message: Request for
RESTARTTIME configuration
parameter
RESTARTTIME=30
seconds
Conf
4.3 Controlling output power socket manually
Output power socket can be managed also manually by hidden button on
bottom side near the SIM slot. Button can be activated by suitable thin
mechanic tool. Pressing this button causes switching output power socket to
negative value.
5. Security features
Product can be configured for advanced security to disable control of the power
socket by unauthorized persons. Power socket uses two security methods:
Allowing only authorized phone numbers
Authentication by password/SMSPIN number
In case of first option – device will ignore all SMS and calls from unauthorized
phone numbers. If security is not configured, anyone who knows SIM card
calling number can control power socket remotely. Power socket uses security
lists for this purpose. This list supports 7 phone numbers max.
NOTE:
Configuration commands are accepted only within first 10 minutes
after intelligent power socket is plugged in. It is from security reasons.
Configuration SMS messages are typed by Bold.
