Page 7 of 28
3. Network configuration
Here you can configure networking and security parameters:
IP address
You can setup IP networking parameters such as
IP address
,
Network mask
Default Gateway, DNS servers;
please ensure to enter proper values. Please
note it is necessary to define a fixed IP address even if case you are using a
DHCP environment.
Note…
When your local network is using private addresses behind
a NAT router and you would like to make your IQTS-GI500
accessible from the Internet, it is necessary to setup port
mapping (forwarding, server rule) in your router for the IP
address assigned to IQTS-GI500 and selected ports, e.g.
port TCP 80 for accessing web interface.
SOHO example: Your network contains a modem/router with NAT for internet
access, having IP address 192.168.1.254. Simply find an unused IP address
from the private network range it use (192.168.1.1-192.168.1.253) e.g.
