Page 9 of 28
HTTP port
It is possible to change port for the web interface from default value 80 by
entering new value to
HTTP port
field.
SNMP
SNMP can be deactivated by unchecking the SNMP checkbox, it is active by
default. You can change passwords for
SNMP read
and
write communities
(default value is “public”). When there is an output control event resulting from
assessment of automatic packet loss rules – the watchdog feature; IQTS-
GI500 can send SNMP trap messages to defined IP address besides operating
the relay of the socket, simply check particular check boxes
Relay
and/or
Send
TRAP.
The
SNMP time for restart
defines how long is socket turned off when restart
command is issued via SNMP.
Add log events
You can select, which events to write into the event log:
Power UP
will write
event at every device startup and time has been successfully synchronized
from NTP server;
Ethernet LINK
will write event at every time when Ethernet
link has been established.
Output socket state after startup
You can choice which state will have output socket after device will be powered
on: to be off, on, or to remember last state before device has been turned
off/power has been lost.
