CONTROLS
Your TVS iQube Electric SmartXonnect comes
with a pair of identical control keys. These keys
are to operate ignition cum steering lock and
seat lock.
IGNITION CUM STEERING LOCK
The ignition switch enables and disables the
electrical circuit and steering lock. The three
positions of the switch are described below.
1. 'OFF' position
All electrical circuits are deactivated. The key
can be removed from the lock.
2. 'ON' position
All electrical circuits are activated. The
connected instrument cluster will wake up and
the vehicle can be shifted to drive mode.
Control key cannot be taken out from the lock in
this position.
Instrument cluster background illumination,
front position lamp, illuminating logo,
automatic headlamp on (AHO) and tail lamp
glow automatically once the ignition key is
turned 'ON' without activating any other
switches.
Note
Leaving the ignition cum steering lock in ‘ON’
position for a prolonged time will drain the
battery when the vehicle is not in use. Switch
OFF and take the key out when the vehicle is not
in use.
Always lock the steering while parking for
safety.
Caution
Never attempt to move the vehicle when the
steering is locked, you may lose balance.
Warning
16
3. 'LOCK' position
Your TVS iQube Electric SmartXonnect steering
can be locked in both ‘left’ and ‘right’
directions. Turn the handlebar to the ‘left’ or
‘right’. Press the key IN and rotate it to the
‘LOCK’ position from ‘OFF’ position.
All electrical circuits are deactivated and the
steering is locked. Control key can be removed
from the lock.
Insert the key into the lock and press the key IN
and turn it to ‘OFF’ or ‘ON’ position to unlock
the steering.
OM TVS iQube Electric SmartXonnect - Rev 4 - As on 08 Jun 2022
Summary of Contents for SmartXonnect
Page 1: ......
Page 2: ......
Page 34: ...32 OM TVS iQube Electric SmartXonnect Rev 4 As on 08 Jun 2022...
Page 48: ......
