Series eWAVE
Page 9
LT286 April 09, 2020
IMPORTANT INSTRUCTIONS FOR OUTDOOR INSTALLATIONS
1. During installation, to maintain the water resistance of the junction box, it is necessary to make sure that all the
components of the fitting are perfectly matched and placed in their position and sequence along the conduit
hose (see pictures);
2. Furthermore, the cut end of the conduit attached to the fitting must be cut uniformly to allow correct pairing and
assembly, which is crucial for ensuring water resistance. Therefore, make sure that the main ring nut of the
fitting that fixes the conduit is firmly tightened. If intended for outdoor installation, a water-tight conduit must be
employed.
MAINTENANCE INSTRUCTIONS
Before cleaning, make sure the power has been turned off at the circuit breaker
panel and that the heating element of the heater is cool.
Never immerse the appliance in water or any other liquid.
Cleaning and maintenance must be performed by the user and not by
unsupervised children.
1. It is important that eWAVE units are regularly cleaned to ensure long and efficient operating life.
2. To clean, use a soft damp cloth and then dry thoroughly.
3. Make sure all parts are dry before powering the heater.
4. eWAVE units should be cleaned and inspected every 3 months.
5. Avoid the use of harsh detergents, solvents, and abrasive or aerosol cleaners as they may damage surfaces.
6. When cleaning the heater, always inspect the back of the heater for build-up of insects, bird droppings, dust,
salt build-up, etc. and clean back thoroughly.
TECHNICAL SERVICE
Always disconnect the appliance before doing any maintenance operation.
1. If the heater is removed from mounting brackets, it should be stored in an undercover dry location.
2. Always inspect the heater after high winds, earthquake, vandalism or any other unusual event that may have
affected the heater. Ensure all parts are dry before powering the heater.
3. Any maintenance service, excluding cleaning, must be carried out by an authorized Manufacturer
representative.
4. If you have any question about your appliance, call the local authorized distributor.
