11th Guiyang Street, YEDA,
Yantai 264006, P.R. China
+86-400-998-3088
the Compass Calibration option.
z
Short press the
Menu button (7)
to enter the Compass Calibration
interface. An icon like a triaxial coordinate system appears on the screen.
z
Follow the icon prompt to rotate the device along three axes at least 360
degrees each axis in the 15 seconds.
z
After 15s, the calibration is finished and exit to the home screen.
z
Press the
Power button (6)
briefly to terminate and exit the calibration
without saving within 15 seconds.
Standby
Setting the standby state and duration
z
Press and hold the
Menu button
(7) to enter the main menu interface.
z
Short press the
Up button (6)
or
Down button (8)
to select the Standby
Settings option.
z
Press the Menu button (7) briefly to turn the standby mode on/off.
z
The icon is displayed on the status bar when it is on.
z
When the standby function is on, the device will automatically enter the
standby state with no operation within 15 minutes, and power off
automatically after 15 minutes in the standby state.
z
Note:
When Wi-Fi, recording or video output function is turned on, it
will not automatically stand by.
