11th Guiyang Street, YEDA,
Yantai 264006, P.R. China
+86-400-998-3088
z
After finishing the above steps, the LED indicator
(17)
on the battery charger
(15)
will
display the battery charge state.
-
◐
Battery level is from 1% to 25%
-
●
◐
Battery level is from 25% to 50%
-
● ●
◐
Battery level is from 50% to 75%
-
● ● ●
◐
Battery level is from 75% to 99%
-
● ● ● ●
The battery is fully charged.
z
After the battery is fully charged, remove the battery pack from the battery charger.
Note:
Two batteries can be charged at the same time: the second slot is designed for it.
Battery Pack Installation
z
Turn up the puller
(14)
on the battery pack
(13)
, and align the orange line
(D)
on the
battery pack
(13)
with the orange line
(C)
on the battery slot
(21)
and push the battery
pack
(13)
into the battery slot
(21)
.
z
When the battery pack is completely
inserted into the battery slot, turn the puller
(14)
clockwise to lock the battery pack.
z
Close the puller (14), and the battery pack is completely installed.
z
Cabin can only be powered by this battery pack. If other battery packs are used, it may cause
irreparable loss, damage to the device, and can even possibly cause fire.
Safety Measures
z
Use this battery holder to charge the battery pack only. Otherwise it will cause irreparable
damage to the battery pack or holder and even may cause fire.
z
Before a long storage time, the battery pack should be partially charged, not fully charged or
discharged.
