11th Guiyang Street, YEDA,
Yantai 264006, P.R. China
+86-400-998-3088
will become a USB icon
and
the power indicator will turn green.
z
When the external power supply is disconnected, Cabin will automatically switch to the
battery pack power supply and will not shut down.
8. Installation and Use
Power-on and Operation
WARNING! The lens of Cabin must not be pointed at any sources of intense energy, such as
laser-emitting devices or the sun. This may damage the electronic components in the device.
Damage caused by failure to comply with the operating guidelines is not covered under
warranty.
z
Remove
the lens cap (1)
. Press and hold the
Power button (5)
for 2s to power on the device.
Then, the home screen appears after 3s.
z
Rotate the eyepiece
diopter adjusting ring (10)
to adjust the resolution of the icons on the
display. After the adjustment is completed, for the same user, when using it again there is no
need to adjust the diopter again.
z
Rotate the
lens focus knob (12)
to focus on the object observed.
z
Set the image mode: Press the
Menu button (7)
to open the shortcut menu, and set the image
palette mode, which is white-hot, black-hot, palette, red-hot, and highlight. The icon on the
top status bar is updated in real-time.
z
Settings of the screen brightness, image sharpness, image mode, and digital zoom (See the
Shortcut Menu
in this manual for details).
z
After using, press and hold the
Power button (5)
, and the shutdown countdown screen will
appear. When the countdown counts from 3 to 0, the device shuts down. Then, you can
release the power button. The current status will be automatically saved after shutdown.
During the shutdown data saving period, do
not cut off the power, otherwise the data will
not be saved.
z
If you release the button before the end of the
countdown, the device will be on standby. You
