iRay Technology Cabin Series, User Manual

19

20

16. LASER INDICATOR 

The CABIN features a visible laser indicator which is hidden  
by default.

When using the laser feature for the first time, press and hold the 
Up/Zoom Button (6) + Menu Button (7) + Down/Photo Button (8) 
for more than 10 seconds. The laser indicator will be activated 
after hearing a shutter click.

On the home screen, short press the 

Up/Zoom Button (6) + Menu 

Button (7) to enable or disable the laser indicator once activated.

17. STADIAMETRIC RANGEFINDING 

The CABIN provides a stadiametric rangefinding function which 
allows you to calculate your distance from an object with a 
known size.

On the home screen, press and hold the 

Up/Zoom Button (6) 

and the 

Menu Button (7) to enable the stadiametric rangefinding 

function.

After this function is enabled, two lines used for measuring will 
appear and icons representing 3 pre-configured object heights 
(Deer 5.5’, Hog 3’ and Rabbit 8”) as well as their distance values 
in meters. To change the unit of measure between meter and 
yards, short press the 

Menu Button (7).

Adjust these measurement lines to match the height of your target 
by pressing the 

Up/Zoom Button (6) or Down/Photo Button (8) 

to ensure that the measured object is within these lines. When 
you adjust these measurement lines, the rangefinding data on 
the right will also change accordingly. 

Press and hold the 

Up/Zoom Button (6) and the Menu Button (7) 

to exit the stadiametric rangefinding mode. 

18. LED LIGHT 

The CABIN provides an LED light which can be quickly deployed 
and adjusted. 

The LED light is disabled by default. Short press the 

Menu 

Button (7) + Down/Photo Button (8) to enable the LED light. At 
this time, the brightness is at level 2, and the status bar displays 
Light Icon 2.

Short press the 

Menu Button (7) + Down/Photo Button (8) 

again, the brightness will reduce to level 1, the status bar will now 
display Light Icon 1.

Short press the 

Menu Button (7) + Down/Photo Button (8) again 

to disable the LED light and the status bar will display the Light 
Icon OFF.