11
12
1
4
6
7
2 3
5
9
8
10
11
The status bar is at the top of the screen and shows information
on the actual operating status of the CABIN. From left to right the
icons are:
1 - Current image mode (White Hot ; Black Hot ; Red Hot ;
Highlight ; Color )
2 - Ultraclear Mode (Ultraclear off ; Ultraclear on )
3 - Current magnification (such as 2.0x)
4 - Wi-Fi Status (Wi-Fi off , Wi-Fi on )
5 - Calibration Mode - In Automatic Shutter Calibration (A) Mode,
5 seconds before Automatic Calibration, a countdown icon
will be displayed next to the Calibration Icon instead of the letter
(A). When the device is just started, it will automatically and
continuously perform Shutter Calibration, but there will be no
Countdown Icon. Only after the device is completely temperature
stable (about 10 minutes of continuous operation) will there be a
Countdown Icon for Automatic Shutter Correction.
6 - Compass (not displayed when the Compass is turned OFF)
7 - Video Output Status (not displayed when the Video Output is
turned OFF)
8 - Automatic Standby Status (OFF by default)
9 - LED Indicator Status ( upon startup by default)
10 - Clock (set in the Main Menu or set the time in the InfiRay
Outdoor App)
11 - Battery Pack Indication: When the battery icon is in Green
it indicates that the power is greater than 20%. When it is in
red it means that the power is low and should be charged
immediately. When a lightning bolt appears in the middle
of the battery icon, it indicates that an External Power Supply
is powering the device. When CABIN is not charging, but
connected to a computer, a USB icon will be displayed
13. SHORTCUT MENU
You can quickly adjust common functions through the Shortcut
Menu: Image Mode, Screen Brightness, Image Sharpness, and
Image Contrast.
On the Home Screen, briefly press the
Menu Button (7) to
access to the Shortcut Menu Interface.
Press the
Up/Zoom Button (6) or Down/Photo Button (8) to
switch the following options:
Image Mode: After selecting this option, press the
Menu Button
(7) to adjust the Image Mode. There are 5 modes: White-Hot,
Black-Hot, Red-Hot, Color, and Highlight.
Screen Brightness: After selecting this option, press the
Menu
Button (7) to adjust the Screen Brightness from 1 (dim) to 5 (bright).
Image Sharpness: After selecting this option, press the
12. STATUS BAR OVERVIEW
Menu Button (7) to adjust the Image Sharpness from 1 lowest
sharpness) to 5 (highest sharpness).
Image Contrast: After selecting this option, press the
Menu
Button (7) to adjust the Image Contrast from 1 (low contrast) to 5
(highest contrast).
Press and hold the
Menu Button (7) to save these changes and
return to the Home Screen.
Note: In the Shortcut Menu, if there is no operation within
5 seconds the device will automatically save any changes and
return to the Home Screen.
14. MAIN MENU
On the Home Screen, press and hold the
Menu Button (7) to
access the Main Menu.
Press the
Up/Zoom Button (6) or Down/Photo Button (8) to
switch between the Menu options.
The function options of the Main Menu are cyclical: When the
cursor reaches the last Menu option on the 1st page, it will start
from the first Menu option on the 2nd page. When the cursor
stays at the 1st option on the 1st page, you can press the
Up/
Zoom Button (6) to jump directly to the last Menu option on the
2nd page.
Press the
Menu Button (7) to modify the parameters of the
current option or go to the next level of the Menu.
The position of the cursor indicates the selected option, the icon
of which will change from White to Blue.
The operation of second/third level Menus are the same as above.
Under all Menu interfaces, you can press and hold the
Menu
Button (7) to save changes and return to the Home Screen.
Pressing the
Power Button (5) will return to the upper Menu
without saving changes.
Under all Menu interfaces, the device will return to the Home
Screen when there is no operation within 15 seconds.
During continuous operation of the CABIN, when exiting from the
Main Menu, the cursor remains at the last position before exiting.
When you restart the CABIN and go to the Main Menu for the first
time, the cursor will be at the first Menu option.
MAIN MENU OPTIONS AND DESCRIPTIONS
ULTRACLEAR
Turn Ultraclear mode on/off
Press and hold the
Menu Button (7) to access the Main
Menu Interface.
Short press the Up/Zoom Button (6) or Down/Photo Button (8) to
select Ultra-Clear.
Short press the
Menu Button (7) to enable or disable Ultra-Clear
mode. You will hear a click of Shutter Calibration on selection.
The icon in the Status Bar also changes accordingly after this
option is enabled or disabled.
Summary of Contents for Cabin Series
Page 16: ...27 28 NOTES...
Page 17: ...29 30 NOTES...
