InfiRay Outdoor •
MATE Series
• User Manual www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
complete, press the
Menu (4)
button briefly to return to the range notification interface.
The last one is custom, which can set the height and distance parameters. Press the
Menu (4)
button briefly to switch
among the selection of the height, distance and returning to the range notification interface.
Press and hold down the
Menu (4)
button to exit to the home screen.
Pixels Defect
Correction
Pixels Defect Correction
Press and hold down the
Menu (4)
button to enter the Main Menu.
Select the
Pixels Defect Correction
option with the
Up (6) / Down (3)
button.
Briefly press of the
Menu (4)
button to enter the Pixels Defect Correction
Interface.
A reticle will appear in the center of the screen and the number of corrected
defect pixels will display at the bottom of the screen.
And then, moving the reticle to select the Defect Pixels by pressing the
Up /
Down / Camera / Menu
button.
After selecting the Defect Pixels, press and hold the
Up (6) + Down (3)
buttons
at the same time to correct the blind pixels. When the
Add
message appears
on the bottom of the screen for a short time, the correction is successful.
At the same position, press and hold the
Up (6) + Down (3)
buttons again to
cancel the correction with the Del massage appearing for a short time.
Summary of Contents for MATE MAH40
Page 1: ......
