InfiRay Outdoor •
MATE Series
• User Manual www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
It needs to reboot the device to take the new name and password effect.
Otherwise, clicking the synchronize time option in the setting interface
can synchronize the time on the MATE with the mobile device.
Note
：
-
When restored factory settings, the Wi-Fi name, password, and system
time are restored to the factory default settings.
16
Battery Pack Installation
MATE series is equipped with a professional power bank - IBP-4 InfiRay
battery pack
(22)
in the package, which is impact-resistant, waterproof and
lightweight, making it perfect for outdoor use.
Secure the IBP-4 InfiRay battery pack
(22)
to the smaller ring of the
adapter fixture
(27)
in the package, and tighten the screws
(26)
with the
hex-nut wrench (S=2mm).
Install the adapter fixture
(27)
with
IBP-4 InfiRay battery pack
(22)
on
your day scope
(17)
. Close the lever
(25)
on the adapter fixture to lock
the fixture.
The fixture is suitable for the most day scope with barrel diameter of
30mm.
After installation, insert the data cable
(24)
to Type-C port
(12)
of MATE
and the battery pack.
Once connected, the battery pack will automatically charge the MATE.
Press the
Power button
(23)
of the battery pack to check the remaining
power of the battery pack. For details, please refer to the manual of the
IBP-4 InfiRay battery pack.
Safety Regulation
Please use standard charger to prevent the battery pack from damage.
It is prohibited to expose the battery pack in the high temperature
Summary of Contents for MATE MAH40
Page 1: ......
