Product Installation
Setting of Massage Chair
Align the holes H1 and shaft H2, let H2 pass through H1. Lock
the shafts with the circlips provided.
Attach the backrest pad and zip the zipper connecting legrest
and seat cushion.
Installation site
Please be sure there is enough space for the massage chair to tilt.
at least 8cm
mat
at least 25cm
The contact area
between the seat
frame and the
floor
Safe distance around the massage chair. Please place the product where there is plenty of
space: Raise the legrest to the highest and move the backrest forward and down to the lowest
level of 25cm. Make sure there is 25cm of space in front of the chair.
Do not expose the massage chair to the direct sunlight or high temperature condition (e.g. in
front of heating equipment), as it may lead to color fading or hardening of the synthetic leather
of the massage chair.
Please lay a mat under the machine to avoid causing damage to the floor. When laying the mat,
the size of mat should be big enough to cover the contact area between the machine and the
floor and the foot contact area.Floor area (at least 200cmx90cm), as shown in the figure.
It should keep close to the power socket when the machine is installed.
The contact area
between the legs
and the floor
07
08
