HDC-5004 IP to QAM Modulator User Manual
Date 28. Januar 2020
BLANKOM-HDC-5004_IP2QAM-modulator-V1.4-RR-01-2020
9
The MUX Menu:
Configure ‘Input Area’ and ‘Output Area’ with buttons in ‘Operation Area’. Instructions are as below:
：
Enable/disable the CA Filter function. Clicking this box, you can filter out the input CA-PIDs to avoid
disturbing with the device scrambling function.
: To enable/disable the PID remapping (disabled recommended for pass through and also PID
forwarding). If similar PIDs are in the Input streams, please remap them avoiding conflicts
To refresh the input program information
To refresh the output program information
Select one input program first and click this button to transfer the selected program to the right
box to be processed to the output.
Similarly, you can remove TV Services from the multiplex in the right box.
To select all the input programs
To select all the output programs
To parse programs
time limitation of parsing input programs from TS
This must be used for every Input stream to read its content after setting up the IP addresses:
Window opens….
Select the input RJ45 port: ‘IPTV 1…4’ or Rear
-
Side ‘IPTV’
Output Area
Operation Area
Input Area
