HDC-5004 IP to QAM Modulator User Manual
Date 28. Januar 2020
BLANKOM-HDC-5004_IP2QAM-modulator-V1.4-RR-01-2020
2
1.5 Specifications
Input
Input
512 from 4x IP inputs by 100Mb/s Ethernet Ports
Transport Protocol
TS over UDP/RTP, unicast and multicast, IGMP V2/V3
Transmission Rate
max 84Mbps for each IPTV-1…4 input
Mux
Remapping
Max. 780 PIDs per Channel
Output Channel
4 adjacent -> 4x IP out as MPTS (from 4 MUX)
Functions
PID remapping (auto / manually)
PCR restamping
PSI/SI table automatically generating
NIT,LCN generation and inserting, auto or manual
Encryption
Parameters
Max simulcrypt CA
4
CA Standard
ETR289, ETSI 101 197, ETSI 103 197
Connection
Local/remote connection to CAS
Modulation
Parameters
QAM Channel
4 adjacent carrier
Modulation Standard
DVB-C Annex A/C and B
EN300 429/ITU-T J.83A/B
Symbol Rate
5.0...9.0 Msps, 1 kSps steps, FEC
Constellation
16, 32, 64, 128, 256QAM
dep. On A/C or B
FEC
RS (204, 188) inner/outer configurable
RF Output
Interface
1 F-type output port for 4 QAM channel, 75Ω
impedance
RF Range
30...1000 MHz, 1kHz steps
Output Level
-10 dBm...+0 dBm (87...107 dbµV), 0.1dB steps
MER
≥ 40dB
ACLR
-60 dBc
TS output
4 MPTS IP output over UDP/RTP multicast by
1x100/1000M Gbit-Ethernet Port (@ Rear – IPTV –port)
System
Network management software (NMS) support (Rear: 100BaseT)
and USB port upgrade support
General
Dimensions
19’’ 1U: 430mm×180mm×44mm (WxLxH)
Weight
3kg
Temperature
0...45
℃
(operation), -20...80
℃
(storage)
Power Supply
AC 100V±10%, 50/60Hz or AC 220V±10%,
50/60Hz
Consumption
15.4W