HDC-5004 IP to QAM Modulator User Manual
Date 28. Januar 2020
BLANKOM-HDC-5004_IP2QAM-modulator-V1.4-RR-01-2020
3
Chapter 2: Connection Description
2.1 Front & Rear panel
Front:
Power LED, 4x IPTV 1…4 Input stream RJ45 ports
Rear left
RF output F-female 75 Ohm
…
IPTV GbE Input/Output
…
NMS/CAS: Network management port and CAS data port
USB-Port for Firmware upgrade
…
Power switch, Fuse
…
AC IEC Power Socket
Rear
right
Grounding
Chapter 3 Installation Guide
3.1 Acquisition Check
When you opens the package of the device, it is necessary to check items according to packing list.
Normally it should include the following items:
HDC-5004 IP QAM Modulator
User’s Manual (online download from www.blankom.de)
Power Cord and grounding wire (depending on country)
3.2 Installation Preparation
When you install the device, please follow the steps below. The details of installation will be
described after this chapter. Users can also refer to the rear panel chart during the installation.
The main steps of the installation include:
Checking the possible device missing or damage during the transportation
Preparing relevant environment for installation
Installing the IP Mux-Scrambling QAM Modulator
Connecting signal cables
Connecting communication port for WEB-IF