Specifications are subject to change without notice
BLANKOM HDM-95xyC/T EN 2021 V1.0
HDM-9500C or T
del instalador y/o del operador. En particular, deben cumplirse los reglamentos y directrices aplicables en los
respectivos países para la puesta en marcha, especialmente para la conexión de la energía y todas las normas y
leyes relacionadas con los productos.
Anotação:
Todas as instruções de operação publicadas por nós são destinadas ao profissional de antena e TI que possui
conhecimentos básicos de recepção, rede e tecnologia de equipamentos. O cumprimento de todos os regulamentos
e diretrizes relevantes para a instalação e operação de tais sistemas é de responsabilidade do instalador e/ou do
operador. Em particular, os regulamentos e diretrizes aplicáveis nos respectivos países para comissionamento,
especialmente para a conexão de energia e todas as normas e leis relacionadas aos produtos devem ser
obedecidas.
Installation Notes
All types of the IRENIS-
BLANKOM family are 19“devices with 1 RU height designed for installation in 19”
racks. In addition to the front panel screws an internal module support is required at the rack.
Depending on the Frontend used and the operating adjustments e.g. the SATellite RF-input port carries
DC Voltage (13V /18V, max. 400 mA).
By connecting a mains cable, the device can become functional without any auxiliary appliances. The
power supply units are designed for the wide range of 100-230V AC; a manual adjustment of the voltage
is not necessary.
For some models the second power connector is feeding another independent power supply for internal
redundancy. For a maximum of redundancy both power supplies should use different circuits.
All the outputs are decoupled from one another. Thus, the circuit does not have any effect on the
functioning of the device. Connections that are not required need not to be terminated.
Suggestion:
CAT 6E Ethernet cable for Gigabit-Ethernet
FRONT-CONNECTORS:
RF-Testport
–
20dB / RF
–
Output / Management Ethernet-RJ45 / Streaming
–
Port GbE /
LED’s
Rem.: HDM-94xy series has an additional ASI Port @ the front.
REAR-SIDE:
Ground
–
ON/OFF-Switch / Fuse / IEC-Male Power / 4 or more HDMI-Inputs
The right 2 empty slots are for model types with more HDMI-Inputs.
Please always use different physical networks for Streaming and Management to avoid flooding
management ports with unnecessary streaming data or at least separate them into different VLANs.
Because of Multicasts it is highly recommended to connect the streamer port (DATA) to a Layer 2+ /3
IGMP-Switch (not IGMP-Snooping only because this is just snoop and pass not the needed
‘IGMP
-
Filtering’
: Query and Answer = Join and Leave streams at the ports).
