Author: RRi
Page - 14 -
Version 1.0
Date: 10-2019
BLANKOM-IPQAM-801_User_Manual_ENv1.0.docx
IPQAM-801 DVB-C A/C Modulator IP to QAM User Manual
Intelligent switches with Loop detection can also be used i.e. if you separate the Network ports by
VLAN's. You will find some more about streaming things at the end of this manual.
Note:
If you have set more than 2 IP ranges in your PC and try to get and check the Streams by VLC:
VLC is somehow stupid and do not recognize via which Ethernet (RJ45 or WIFI) IP address –Source it can
grab the Stream. The difference is to manually set the METRIC values: The lower the Value the higher the
priority for that interface IP address.
3.2 General Setup
Status
Starting the PC-NMS-Software:
After unpacking the compressed file by unzip in a folder of your choice, by using i.e. 7Zip
freeware:
->
Go to this folder:
double click / open NMS.exe (If you do not see the .exe,.
your folderview has been set to not show the file extensions and the NMS only is shown with its Icon.
Anyway, a window will open: