11
10
Set with safety switch in a power supply
box, if there is heavy pressure on power
supply box, then forced stop back lying
function, prevent hurts peoplewhen lying.
Method of usage
Method of usage
3.Turn off power, stop massage
3) Cut off the power of the whole machine.
Figure (Switch power off)
Diagram of the switch position of power supply
Power switch method map
WARNING
1)Press power button during massage progress, all massage function will be stop
immediately, the backrest and footrest will return to original position automatically,
meanwhile you can set up memory function. After rated working time, all massage
functions will be finished, meanwhile you can set up memory function, but
backrest and footrest won't return to original position.
2)Memory store function: After rated working time or switch off, the hand controller
displays "Memory" and glitter, remind the users whether need to store the
massage mode before turn off, you can press the memory function buttons
“
M1
”
or
“
M2
”
as you like, store the massage mode.
4.Calf installation
·
Install the rotating shaft incalf fixed axis first, noticed the hole should be aligned, so
that the R shape pin assembly (chart 1)
·
After calf is connected with the fixed axis aligned, then insert (chart 2)
（
chart 1
）
（
chart 2
）
·
Plug R pin, then moved to the other side of the calf, and the plug R pin (chart 3)
·
Finished (chart 4)
（
chart3
）
（
chart4
）
·
When the machine under the working state, with lying and calf rest lifting, you
could not apply gravity on the calf, to prevent the massage chair does harm to
peoplebefore dumping(chart1).
·
Ensure the mechanism hands not in the seat part ,otherwise will cause
uncomfortable in the Buttock when you seating in the chair(
chart2).
Note
（
chart1
）
（
chart2
）
（1）
（2）
·
Using head cushions can reduce the kneading massage intensity on neck and
shoulder, according to your needs to decide whether the head cushions is
needed (recommend head cushions). Backrest cushion and backrest connected
by zipper (1), head cushions and backrest pad connected by thread gluing (2).
Zipper
Thread gluing
5. Head cushions and backrest pad's dismounting and use manual
FUSE: T5AL 220V
ON/OFF
CONTROLLER JACK
POWER INPUT
