6
Preparation
Fit the holder, hose hook, cord hook to
the body
Put tap water into the clean water tank by
removing the cap attached to the hand
tool accessory
•
Capacity is about 300mL.
●
Be sure to close the cap to the clean
water tank.
●
Only use tap water or alkaline
ionized water in the clean water
t a n k . F a i l u r e c o u l d c a u s e t h e
machine to malfunction.
●
Drain any water left in the clean
water tank after use. If water is left
in the tank, it could cause a water
leakage or mold formation.
Connect the vacuum hose
• Insert the hose into the connection port of the
body and turn the cuff clockwise to lock.
Connect the hand tool
• Insert the hand tool at the opposite end of the
vacuum hose connected to the body and turn
the cuff clockwise to lock.
Cap
Clean water tank
Cuff
Cuff
Holder
Cord hook
Hose
hook
