STATUS
POSSIBLE CAUSE
REMEDY
Not running
No air coming out
Power plug is not securely plugged into
the electric socket .
Please plug the power plug securely into
the electric socket .
START/ON button has not been pressed .
Please press the START/ON button .
Air temperature does not change
This is normal as the product is adjusting the temperature .
Blanket is not dry
Blanket is not warmed up
Trying to dry several blankets at once .
Please dry one blanket at a time .
Air filter is dirty .
Please clean the air filter (P12) .
The blanket is not laid out correctly .
Please lay down the blanket correctly
(P7) .
The blanket is too heavy .
Please lift the blanket a little so warm
air can reach the bottom of the heavy
blanket .
The air flap is not opened .
Please open the air flap (P7) .
The air entry port or air outlet is blocked .
Please remove anything blocking the
air entry port or air outlet and run the
product again .
The air entry port or suction port is too
close to the wall .
Please keep the product at least 15cm
away from the wall .
Error code is indicated as [E1]
Air entry port on right side is facing
down when choosing the mode .
Please place the product in the correct
position to dismiss the error .
Error code is indicated as [E2]
Air entry on right side is facing down
while product is running .
Please place the product in the correct
position to dismiss the error the product
again .
Error code is indicated as [E3]
The product is running in an area with
high temperatures or too much warm air
from other heaters .
The product is running with a folded
hose .
The main body temperature is rising
abnormally .
Unplug the power plug from the electric
socket and leave it alone to cool
down . The error will clear off when the
temperature of each part returns to
normal . The product cannot operate
until it temperatures return to normal .
When the error message is dismissed,
the product will automatically restart .
Error code is indicated as [E4]
Error code is indicated as [E6]
Error code is indicated as [E7]
Error code is indicated as [E5]
Product failure has occurred .
Please unplug the power plug from
the electric socket and contact IRIS
Customer Service Center . Do not touch
the product until the main body has
cooled down .
MODEL
SPECIFICATIONS
RATED VOLTAGE
120V~
RATED CURRENT
5 .2A
RATED FREQUENCY
60 Hz
PRODUCT WEIGHT
3 .97lbs . / 1 .8kg
PRODUCT SIZE
(NOT INCLUDING THE POWER CORD)
6 .3 W x 5 .4 D x 14 .2 H in
160 W x 137 D x 360 H mm
CORD LENGTH
78 .7 in / 2 .0m
ATTACHMENTS
Shoe drying attachment
SAFETY DEVICES
Temp Sensor, Thermostat, Thermal Fuse
TIMER
15, 30, 45, 60, 75, 90, 120, 180 minutes
ITEMS INCLUDE
Blanket warmer, shoe drying attachment
*Specifications are subject to change without prior notice .
SPECIFICATIONS
TROUBLESHOOTING
Before making repairs, please read the following content carefully to fix common problems .
Problems that could not be resolved .
Please contact the dealer of purchase or IRIS USA, Inc . Customer Service .
Warning:
Do not disassemble, repair or modify the product yourself . Any other servicing should be performed by any
authorized service representative .
13
14
