3-7
3.2
Verifying Your Scanner Installation
To verify if your scanner installation is correct, I.R.I.S. provides
you a useful test program called I.R.I.S. Capture Tool. With
this tool, you can perform simple scans and view the captured
images. In addition, it helps you complete your scan at a rated
speed.
The following procedure describes how to verify your scanner
installation. If the installation is not correct, please review the
preceding section to check if the cable connection and scanner
driver have been successfully installed.
Before you begin, be sure the scanner is on.
1.
Select Start>Programs>I.R.I.S. IRIScan PRO
Scanner>Capture Tool.
Note: If I.R.I.S. Capture Tool does not appear on “All
Programs” of your Start menu, please access from the
following path:
C\Windows\TWAIN_32\I.R.I.S.\IRIScan PRO\Capture
Tool.exe
The Select Scanner Model dialog box will be displayed.
2.
Select your driver type and scanner model and click OK.
The following Capture Tool dialog box will be displayed.