C
HAPTER
5
-
F
REQUENT COMMANDS
43
then enter your keyboard commands or characters in the
proposed field and click
OK
to confirm.
Switch scan type
: This allows you to program the switch to the
next scan type in the list of scan types available (see:
Basic
settings
,
Reading options
, Scan type).
If the current scan type is
Text
, this will make you switch to
Numeric
. If the current scan type is
Numeric
, this will make
you switch to the
Black-and-White image
. (Remember that the
reading mode is always specified in the
Status
window).
Enable dot matrix mode
: This is used to enable the dot matrix
reading mode.
Undo last scan
: This is used to remove the last scan that was
inserted in the target application.
•
Click
OK
to confirm and close the window.
D
ELIMITERS
With the delimiters, you can indicate how the scanned lines must be
delimited for the reading. Where should the reading actually start if
a word has been cropped during scanning? How should hyphens be
interpreted when occurring at the end of a line? Should keyboard
commands or characters be added before and/or after the read line?
